Preventative Maintenance

---

GMS Furnaces and Air Conditioning strongly believes in timely preventive

maintenance for your residence as being very important to keep your

furnace and air conditioning equipment at an optimum level.  Dirty filters or

loose belts can drive your equipment efficiency down. For residential it

varies based on the usage. At the minimum twice a year and in some

cases, it is every three months. Belts have a tendency to stretch over a

period of time and they need to be replaced every year depending upon

wear and tear.

For commercial equipment in heating and air conditioning, filters need to be

replaced every three to four months, Mechanical systems need to be tuned

up to check for wear and tear, large units such as Make-up units and Roof

top units need to be tuned as well.  

During heating season, we check the heat exchange, the burner

compartment, safeties, blower motor, temperature at the supply and return

duct, flame sensor, amperage and voltage.

During the summer season, we clean the condenser coil, check the

evaporator coil, low pressure, high pressure, temperature at supply and

return duct, suction line temperature and liquid line temperature.

Should you have inquiries contact GMS Furnaces and Air Conditioning.